FREE SHIPPING on orders over $135 (USD)

Load image into Gallery viewer, LifeSaver C1 Community water purifier shown at an angle
Load image into Gallery viewer, A rural off-grid house in an isolated spot in the Scottish highlands
Load image into Gallery viewer, A LifeSaver C1 purifier installed on a kitchen work top
Load image into Gallery viewer, End of the C1 Community water purifier showing the tap
Load image into Gallery viewer, Top view of the LifeSaver C1 community water filter
Load image into Gallery viewer, C1 water filter
Load image into Gallery viewer, C1 schematic

SKU: PRD0140

LifeSaver C1 Large Scale Purifier

Taxes, Duties and Shipping are calculated at checkout.
FREE DELIVERY on orders over $135 (USD)

This is a pre order item. We will ship it when it comes in stock.

PURIFIES: up to 500,000 litres | 1,585 gallons
COST PER LITRE: £0.004 | €0,004 | $0.005
PROVIDES: Community of 100 people with drinking water for up to four and a half years

REMOVES: 99.99% Viruses, Bacteria, Parasites & Microplastics
SUSTAINABLE: Replaceable filter cartridge, no chemicals, no single use plastic
FAILSAFE: Stops working when filter needs replacing
CERTIFIED: Tested to exceed the toughest NSF drinking water standards

NO QUIBBLE MONEY BACK GUARANTEE:
Not 100% satisfied? Return the item complete and in original packaging within 30 days for a full refund

TWO YEAR WARRANTY:
All our products are covered by our 2-year warranty

LifeSaver C1 Community Water Purifier

With around 1% UK households, (more elswhere) on alternative water sources because of their remote location or through off-grid living choices, the LifeSaver C1 has never been so popular.

The LifeSaver C1 is able to purify up to 500,000 litres of harvested rain water or water sourced from rivers, springs or boreholes. Designed to connect easily to an overhead water storage tank (min. 2 metres off ground) or even a municipal supply, the only requirement is a pressure of a least 0.2 Bar (2.85 PSI). With this amount of pressure all the user need do is turn the tap to release a strong flow of safe drinking water, making off the grid homes and small communities truly self sufficient.

Trusted Purification Technology

The replaceable filter membranes used inside the C1 are the same as found in all our high performance purifiers, therefore will protect users from viruses, bacteria and protozoa (cysts). The C1 delivers huge volumes of safe drinking water, whilst still being compact and lightweight enough to mount indoors on a counter top, and robust enough to survive outside or in an out-building. 

  • Purifies up to 500,000 litres of water
  • Safe drinking water at the turn of a tap
  • Removes
    • Virus – 99.99%
    • Bacteria – 99.9999%
    • Cysts – 99.99%
    • Microplastics - 99.99%
  • Easy change, replaceable filter cartridges
  • Fast flow rate
  • No chemical or electricity required
  • FailSafe technology – Once the filter membranes are blocked, water can not pass through, keeping users safe
  • Supplied compete with connector kit to suit most water inputs
  • Drain port incorporated for routine cleaning and flushing of filter
  • Product materials and water effluent both BPA and BPS free
  • Lightweight and robust, with quick connect fittings, making it perfect for emergency or disaster response
  • Multiple C1 units can be daisy-chained together, running from the same source, multiplying the output

You may also be interested in:

Made in Britain logo

Effective against:

  • VIRUS REDUCTION*: > 99.99% (Log 4)
  • BACTERIA REDUCTION*: > 99.9999% (Log 6)
  • CYST REDUCTION*: > 99.99% (Log 4)
  • FILTER MEDIA: Ultra Filtration (UF)
  • DRY WEIGHT: 6 kg / 13 lb
  • VOLUME OF WATER FILTERED**: 500,000 litres / 105,600 US gallons
  • INITIAL FLOW RATE**: 5 litres/min @ 0.2 Bar
  • C1 STORAGE CAPACITY: N/A
  • REPLACEABLE CARTRIDGE: YES
  • WARRANTY: 2 YEARS

*Tested by BCS laboratories issued 18/02/16 based on an adaptation of NSF/ANSI P231 Protocol. These units are tested with two different types of water to challenge the filtration capability beyond standard use. All figures quoted are taken from the stressed challenge phase of the test imitating sewage-contaminated water.

**Volume of water filtered by the product and flow rates dependent on the composition and turbidity of the feed water.

Wherever your adventures take you, it’s vital you understand how to set up and use your LifeSaver water purifiers correctly, to get the best performance possible. 

With that in mind, we’ve created a series of helpful ‘How To’ instructional videos covering everything you’ll need to ensure you get the most out of your purifiers, from the essential first step of “priming” to replacing your UF Cartridge and Activated Carbon Filters.

Description

LifeSaver C1 Community Water Purifier

With around 1% UK households, (more elswhere) on alternative water sources because of their remote location or through off-grid living choices, the LifeSaver C1 has never been so popular.

The LifeSaver C1 is able to purify up to 500,000 litres of harvested rain water or water sourced from rivers, springs or boreholes. Designed to connect easily to an overhead water storage tank (min. 2 metres off ground) or even a municipal supply, the only requirement is a pressure of a least 0.2 Bar (2.85 PSI). With this amount of pressure all the user need do is turn the tap to release a strong flow of safe drinking water, making off the grid homes and small communities truly self sufficient.

Trusted Purification Technology

The replaceable filter membranes used inside the C1 are the same as found in all our high performance purifiers, therefore will protect users from viruses, bacteria and protozoa (cysts). The C1 delivers huge volumes of safe drinking water, whilst still being compact and lightweight enough to mount indoors on a counter top, and robust enough to survive outside or in an out-building. 

  • Purifies up to 500,000 litres of water
  • Safe drinking water at the turn of a tap
  • Removes
    • Virus – 99.99%
    • Bacteria – 99.9999%
    • Cysts – 99.99%
    • Microplastics - 99.99%
  • Easy change, replaceable filter cartridges
  • Fast flow rate
  • No chemical or electricity required
  • FailSafe technology – Once the filter membranes are blocked, water can not pass through, keeping users safe
  • Supplied compete with connector kit to suit most water inputs
  • Drain port incorporated for routine cleaning and flushing of filter
  • Product materials and water effluent both BPA and BPS free
  • Lightweight and robust, with quick connect fittings, making it perfect for emergency or disaster response
  • Multiple C1 units can be daisy-chained together, running from the same source, multiplying the output

You may also be interested in:

Made in Britain logo

Specification

Effective against:

  • VIRUS REDUCTION*: > 99.99% (Log 4)
  • BACTERIA REDUCTION*: > 99.9999% (Log 6)
  • CYST REDUCTION*: > 99.99% (Log 4)
  • FILTER MEDIA: Ultra Filtration (UF)
  • DRY WEIGHT: 6 kg / 13 lb
  • VOLUME OF WATER FILTERED**: 500,000 litres / 105,600 US gallons
  • INITIAL FLOW RATE**: 5 litres/min @ 0.2 Bar
  • C1 STORAGE CAPACITY: N/A
  • REPLACEABLE CARTRIDGE: YES
  • WARRANTY: 2 YEARS

*Tested by BCS laboratories issued 18/02/16 based on an adaptation of NSF/ANSI P231 Protocol. These units are tested with two different types of water to challenge the filtration capability beyond standard use. All figures quoted are taken from the stressed challenge phase of the test imitating sewage-contaminated water.

**Volume of water filtered by the product and flow rates dependent on the composition and turbidity of the feed water.

How To Videos

Enquire for Price

Please fill out the form below and we'll get back to you with pricing information.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)